How Does an Interior Drainage System Work?

To prevent water infiltration into the basement, most buildings constructed work in Utah are equipped with a foundation drain. This provides an effective barrier against groundwater that can cause significant property damage through Utah home settling.

If the exterior American drain has been the most installed type of foundation drain for years, be aware that today there is an interesting alternative to this system.

In this article, learn more about interior drainage systems, including how they work, how to install them, and their benefits.

How an interior foundation drain works?

Generally speaking, an interior foundation drain is very similar to an exterior American drain consisting of a perforated pipe covered with stone to prevent impurities from clogging it, but it is located under the existing concrete slab of the foundation rather than on top of it. its outer perimeter. There are different designs of interior American drains, but they all work in a very similar way.

The system collects groundwater and runoff water that might seep into the basement and routes it to a sump pump, which pumps it out of the basement. The foundations thus remain dry.

Install an interior American drain

The installation of an interior American drain is done through the basement of the property. It is not necessary to excavate the soil around the entire perimeter of the building. Instead, a trench must be made in the concrete slab, all along the foundation walls to place the perforated American drain. This trench should have a slope that will lead the water to a pit where a sump pump will be installed.

Often, a narrow drain system, but of considerable height, will be used. This makes it possible to make a smaller opening in the concrete slab, but still, drain water and hydrostatic pressure in a very efficient way.

It is then possible to close everything to restore its original appearance to the basement.

The interior American drain: a technology adapted to urban regions of Utah

Present on the American market since the 1990s, interior drainage systems are increasingly popular in Utah. One of the main reasons is that they are well suited to the needs of many Utah owners.

Interior foundation drains require less space

Since the installation of an interior American drain is done through the basement of the property. It is not necessary to excavate the ground around the entire perimeter of the building. This is particularly appreciated by people who live in urban areas. And do not have enough space to accommodate the necessary machinery. Because the neighboring buildings are too close together.

Not to mention that choosing to install an interior American drain could eliminate the need. To dismantle balconies or terraces that make excavation work impossible.

Inner foundation drains may be installed in any season

In winter, as the ground is frozen and covered with snow, it is practically impossible. To proceed with the installation of an exterior American drain. However, it is possible to put an interior American drain, regardless of the season.

The importance of consulting experts before installing an interior foundation drain

In conclusion, although interior foundation drains are efficient, simpler to install. And offer several advantages, it is, however, preferable to seek the advice of foundation specialists before prioritizing this type of system.

They will be able to inspect the foundations and determine if this is the best solution to protect the foundations. And basement of a building from water infiltration through Utah foundation repair.

Leave a Reply

Your email address will not be published. Required fields are marked *

WC Captcha 50 − 43 =